View on GitHub

Quorten Blog 1

First blog for all Quorten's blog-like writings

Why does old rubber become hard and brittle? Why does old rubber become sticky and gooey? I’ll answer both questions here.

First of all, to reiterate, synthetic rubbers become brittle because the plasticizers leak out into the atmosphere, which then wrecks other havoc on nature, most significantly our own air we breathe. In particular, UV light exposure speeds up this process. Rubber becomes brittle in the the cold, deformations in that temperature can easily crack and crumble it. Rubber is also generally a thermoset plastic, rather than a thermoplastic, so temperature extremes and wide temperature range cycling can age it faster, making it become brittle and crack. Oxidation, simply exposure to oxygen and environmental conditions that speed up chemical reactions such as high temperature, is also another cause of rubber becoming brittle. Oxidation affects both natural and synthetic rubbers. These phenomenon are generally known as “dry rot.”

Now, what about the other end, when rubber turns into goop? As it happens, all rubbers, synthetic or natural, start out as goop, and the curing process is what turns them into the commercial variants we know and love. Essentially, when commercial rubber turns back into goop, this is a “reversion” of the manufacturing process. For recycling rubber, this is a good thing, as it allows you to reuse the material just the same as you would commercially.

But really, what causes the sticky breakdown? The root cause is a breakdown of the long crosslinks into short crosslinks. Possible environmental causes could be too must pressure exposure, acid/base chemical exposure, gel content loss or decline, and to the extent that it matters, high temperature exposure. Presumably, high humidity, especially when water vapor carries other chemical solvents, would be a significant environmental factor that causes breakdown into goop.

20191013/DuckDuckGo why does rubber break down into goo
20191013/https://www.polymersolutions.com/blog/stickiness-insulting-reality-rubber-reversion/
20191013/DuckDuckGo why does rubber become brittle
20191013/https://www.scienceabc.com/eyeopeners/why-do-rubber-bands-lose-their-elasticity.html
20191013/https://ourpastimes.com/facts-7702205-do-rubber-bands-brittle-age.html
20191013/https://chemistry.stackexchange.com/questions/39500/why-does-latex-tubing-become-white-and-brittle-over-time-especially-where-its
20191013/https://answers.yahoo.com/question/index?qid=20090107163235AA9aUDw